Pulp Pump, D Series Particular Pulp Pump

D series particular pulp pump, it is mainly used for the transportation in small flow rate and short head condition.
Flow Rate: 2-10m3/h
Head: 6-40m
Power: 1.5-15KW
Rotating Speed: 1450-2900r/min
Connection Diameter: 20-65mm
Pulp Consistency: 3%
Working Pressure: 1.0MPa

DWP Series low pulse pump is designed reference to the advantages and the properties of low pulse function which is possess by the products manufactured in Sweden and Germany. It is designed with single suction and one impeller, and the impeller is semi-opened or close type. The seal is the type of back-impeller. An impeller clearance adjust flat if used to preserve high-efficiency running. This kind of pump is suitable for pulp-feed system of high or middle speed.
Flow Rate: 55-1920m3/h
Head 4-50m
Power: 3-250KW
Rotating Speed: 980-1480r/min
Connection Diameter: 100-350mm
Pulp Consistency: 1.5%
Working Pressure: 1.0MPa

DHP series pump is developed with the help of University, which can be used to transform those liquids of corrosive and its water-likely viscosity. The temperature of the medium is from -20 to 120 degree. If the appointed cooling system is adpoted. It can be used to pump the medium of temperature up to 200 degree.
Flow Rate: 6-1200m3/h
Head: 6-180m
Power: 2.2-220KW
Rotating Speed: 970-2960r/min
Connection Diameter: 25-300mm
Working Pressure: 1.6MPa